Techrite Controls Australia Gas Safety Controls &
Combustion Systems

VIC 03 9549 4444  •  NSW 02 9624 4486  •  QLD 07 3807 9094
Siemens LOA2 / LOA3 Series Oil Burner Controls
The LOA... are used for the startup, supervision and control of 1- or 2-stage forced draft oil burners in intermittent operation. Yellow-burn...
Siemens QRA4.U Flame Detector
  The flame detector is used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving in interm...
Siemens QRB1/QRB3 Flame Detector
The QRB... are designed for the supervision of yellow-burning oil flames in connection with burner controls type LAL..., LME7..., LMO..., LMV......
Siemens VKF41C Butterfly Valves
Disk with metallically tight shutoff Sizes: DN40 - DN200 Angle of rotation 85 degrees Suited for use with gases of families I...III and a...
Siemens QRC1 Blue Flame Detector
The QRC1... is a compact UV-sensitive blue-flame detector with an integrated preamplifier.  It is designed for frontal and lateral (90 d...
Siemens LME Series Burner Controls
AGA Certificate 7222 Class 2A, 2B, 2Ca, 2Cb LME... are used for the startup and supervision of 1- or 2-stage gas or gas/oil burners in intermit...
Siemens QRI Infra Red Detector
Key features of the QRI... flame detectors: Detector with infrared-sensitive flame detecting element Integrated flame signal amplifier De...
Siemens LFE1 Burner Control
AGA Certificate 2706 Class 2A and/or Class 2B The LFE1... is designed for the fully automatic control and supervision of single-stage, mul...
Siemens LFL1 Series
AGA Certificate 2734 Class 2A and/or Class 2B For gas, oil or dual-fuel forced draft burners of medium to high capacity For multistage or modul...
Siemens LGK16 Burner Control
AGA Certificate 3861 Class 2A and/or 1A For gas, oil or dual-fuel forced draft burners of medium to high capacity With self-checking flame si...
Siemens LME7 Series Burner Controls
AGA Certificate 7926 Class 2A or 2Ca The burner control LME7... is a microprocessor-based unit with matching system components for the control and...
Siemens VGF Gas Valves
Sizes: DN 65 Flanged - DN 80 Flanged To be used with SKP Actuators AGA Approval No. 2863
Siemens QGO20 Oxygen Sensor
The QGO20... is an oxygen sensor designed for acquiring the residual oxygen content of flue gases in heat generation plant burning natural gas o...
Siemens LGA Gas Burner Control
AGA Certificate 4075 Class 2Cb The LGA... are used for the startup and supervision of atmospheric gas burners of small to medium capacity ...
Siemens VGG Gas Valves
Sizes: DN 15 BSP - DN 80 BSP To be used with SKP Actuators AGA Approval No. 2863
Siemens LMG Series Burner Controls
AGA Certificate 5829 Class 2A or 2Ca LMG... are designed for the startup and supervision of 1- or 2-stage gas or forced draft gas / oil burners i...
Siemens LGI16 Burner Control
AGA Certificate 5403 Class 2A For use on industrial furnaces For burners in continuous operation Without fan control and air pressure su...
Siemens VGD Gas Valves
Sizes DN 40 BSP - DN 150 Flanged To be used with SKP Actuators AGA Approval No. 4570
Siemens QRA UV Flame Detection
The flame detectors are used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving. For use ...
Siemens LGB Burner Control
AGA Certificate 4393 Class 2A and/or 2B The LGB... burner controls are used for the startup and supervision of 1- or 2-stage gas or gas / oil bur...
Siemens SQM1/SQM2 Actuator For Oil Dampers
For air dampers and control valves of oil burners Reversible electromotoric actuators Torque: SQM1... up to 10 Nm SQM2... up to 20 Nm Run...
Siemens SKP75 Valve Actuator
Air / Gas Ratio Actuator Comes with CPI Switch Available in 240 VAC and 110 VAC...
Siemens SQM9 Actuator
Electromotoric actuators Torque up to 60 Nm Running time 30-120 s (predefined by the basic unit (LMV5...))...
Siemens SQN9 Actuator
The SQN9... actuators are designed for driving gas or air dampers of oil or gas burners of small to medium capacity, for load-dependent control of t...
Siemens SQM5 Actuator For Air And Gas Dampers
Actuators for Air and Gas Dampers with electronic modules Reversible electromotoric actuators delivering torque up to 40 Nm Running times fr...
Siemens SQN3/SQN4 Actuator
The SQN3... / SQN4... actuators are designed for driving gas or air dampers of oil or gas burners of small to medium capacity, or for load-dependent c...
Siemens SQN13/SQN14 Actuator
For air / gas dampers and control valves of oil or gas burners Electromotoric actuators Up to 1 Nm rated output torque Direction of rotation: ...
Siemens SQM33 Actuator For Oil And Gas Dampers
For air dampers and control valves of oil or gas burners Electromotoric actuators For SQM33.4... up to 1.2 Nm nominal output torque For SQM...
Siemens SQM40../SQM41.. Actuators For Air And Gas Dampers
Actuators for air and gas dampers Electromotoric actuator up to 10 Nm Clockwise and counterclockwise variants Running times from 15 and...
Siemens SKP25 Valve Actuator
Actuator C / W Press. Gov and CPI Available in 240 VAC and 110 VAC
Siemens SKP15 Valve Actuator
Gas Valve Actuator On / Off Comes with CPI Available in 240 VAC and 110 VAC...
Siemens SQM45../SQM48.. Actuators For Oil And Gas Dampers
For air dampers and control valves of oil and gas burners Electromotoric actuators Torque: SQM45... up to 3 Nm SQM48... up to 20 Nm SQM...
Siemens SQN7 Actuator
The SQN7... actuators are designed for driving gas or air dampers of oil or gas burners of small to medium capacity, for load-dependent control of t...